Prices are for information purposes only. Please contact us for the final price.
POA (Request a Quote) — EXW Ingersoll Rand Warehouse PriceGenuine Ingersoll RandDirect supply from Ingersoll Rand warehouseSupplier availability: Supplied to order — current price, availability and lead time require confirmation.Availability is informational and does not constitute a stock reservation. Availability is rechecked before order confirmation.
The FA2i-MR24MK110GPY is an Ingersoll Rand Infinity Dual Purpose dual-purpose air winch execution. The execution data specifies 4 400 lbs. (2 000 kg) on top layer for utility line pull rating. The full model reference is retained for quotation, configuration review and ordering.
The exact manufacturer scope includes a grooved 24-inch drum for 16 mm wire rope, Marine 812 finish paint and overload protection with an emergency stop on the local lever throttle. The standard construction has a drum guard, manual drum brake and automatic disc brake. Wire rope is not included unless it is stated separately in an agreed order.
| Manufacturer | Ingersoll Rand |
|---|---|
| Series | Infinity Dual Purpose |
| Base model | FA2i-MR |
| Full model / SKU | FA2i-MR24MK110GPY |
| Construction | All steel base and drum |
| Design Factor | 8:1 for the Man-riding rating |
| Design Temperature | 0 degrees C. |
| Motor Type | Piston |
| Gearing | Planetary |
| Brake(s) | Manual drum and auto disc brakes. |
| Utility Line Pull Rating | 4 400 lbs. (2 000 kg) on top layer |
| Utility Line Speed | Variable; 0 – 49 fpm (15 m/min) on top layer |
| Average Air Consumption | 280 cfm (8 m3/min) |
| Drum Length | 24 inch is standard |
| Inlet Size | 1-1/4 inch NPT |
| Exhaust Size | 1-1/4 inch NPT |
| Air Supply Hose | 1-1/4 inch I.D. (recommended; not supplied) |
| Noise Level | 87 dB A (at full rated line pull, lifting) with optional exhaust mufflers |
| Testing | 125% SWL per standard IR test procedure |
| Weight | (estimated): Net: 420 kg |
At 6.3 bar dynamic pressure at the air inlet, utility line pull is rated at 2,000 kg on the top layer and man-riding line pull is rated at 1,445 kg on the top layer. The separate 4,090 kg first-layer stall pull is a stall condition and is not the working-load rating. Utility line speed is up to 15 m/min and man-riding line speed is up to 23 m/min on the top layer.
The piston air motor uses planetary gearing and has an average air consumption of 8 m³/min. The inlet and exhaust connections are both 1-1/4 inch NPT. A 1-1/4 inch inside-diameter air supply hose is recommended but is not supplied. Available pressure must be checked while the winch is operating, including losses through the hose, fittings and treatment equipment.
The manufacturer source states 257 m drum storage with 16 mm rope on the 24-inch drum. Recommended working rope capacity is 80% of storage, subject to dead wraps, reeving, fleet angle and project duty. Confirm the required travel and rope construction before release for manufacture.
The all-steel winch has an 8:1 man-riding design factor, 0°C design temperature and an estimated net weight of 420 kg. The control is a winch-mounted Lift and Shift throttle lever. The quoted 87 dBA value applies with optional exhaust mufflers and must not be treated as an unconditional site-noise guarantee.
The main transparent picture is an AI-assisted cutout prepared from the manufacturer FA2i-MR series photograph. Options, finish, guards, controls and accessory arrangement may differ from FA2i-MR24MK110GPY. The original manufacturer series photograph remains in the content for comparison; neither image replaces the approved execution drawing.
Personnel-lifting and utility ratings must not be interchanged. The stated rope layer, control configuration, braking arrangement and emergency features are part of the application review. Where two ratings are shown, each applies only to its stated duty. Use the supplied unit documentation and approved installation requirements before operation.
Send the required load, working travel or rope length, control reach, mounting arrangement, site temperature and available power supply to AVISTA. Also identify any required hazardous-area classification or third-party witness activity. An accessory, marking or certificate available for another execution is not automatically included in this model.
Price on request. Contact AVISTA for a current quotation for this exact configuration. Supply, delivery, packing and freight are confirmed for each order; the equipment is not represented as local stock.
The photograph is representative of the stated series unless identified as an exact execution image. Controls, guards, paint, trolley arrangement and included accessories may differ. The written scope and approved unit documents take precedence.
Use FA2i-MR24MK110GPY without shortening its suffixes. Specify the required operating duty and any additional options separately so that a similar-looking model is not substituted.
Request a quotation from AVISTA or browse Lifting Equipment. General manufacturer resources are available at Ingersoll Rand Lifting Solutions.
Available on backorder
Enter air temperature and relative humidity.
