Prices are for information purposes only. Please contact us for the final price.
POA (Request a Quote) — EXW Ingersoll Rand Warehouse PriceGenuine Ingersoll RandDirect supply from Ingersoll Rand warehouseSupplier availability: Supplied to order — current price, availability and lead time require confirmation.Availability is informational and does not constitute a stock reservation. Availability is rechecked before order confirmation.
FA5i-24XK1G is an Ingersoll Rand Infinity execution. An Ingersoll Rand Infinity air winch rated at 5,000 kg on the top rope layer at 6.3 bar dynamic inlet pressure. The quoted XK execution specifies an automatic disc brake and includes a drum guard under option G.
| Full model | FA5i-24XK1G |
|---|---|
| Line pull | 5,000 kg on top layer |
| Dynamic inlet pressure | 6.3 bar / 90 psi |
| Top-layer line speed | 0–16.5 m/min |
| Motor power | 25 HP |
| Air flow | 20 m³/min |
| Drum length | 24 in |
| Recommended wire rope diameter | 19 mm |
| Full-drum storage | 410 m on 8 layers; recommended working capacity is 80% |
| Included option G | Drum guard |
| Control | Winch-mounted Lift and Shift throttle lever |
This page covers FA5i-24XK1G rather than the GJ123P or GJ1235V option packages. Standard IR yellow paint is specified. Rope and accessories not expressly included in the approved order scope are quoted separately; a similar photograph does not add guards, controls or certification options to the supply.
The product image illustrates the stated series; the exact configuration may differ. The written scope and approved unit documents define the supply.
Send AVISTA the required load, working travel, duty cycle, available air supply and mounting details. Identify required environmental classification, inspection, witness testing and documentation at the enquiry stage. Final selection and interfaces are reviewed against the application before manufacturing or order release.
The FA5i-24XK1G combines the 24-inch drum execution with an automatic disc brake and option G drum guard. This is a material-handling air winch. Selection must be based on the specified rope-layer rating and the complete order code, including any additional control, protection or certification requirements. A photograph of the same family is useful for identification, while the approved quotation and unit documents define what is supplied.
The manufacturer’s FA5i reference sheet distinguishes MX, MK, AK and XK brake arrangements. XK identifies the disc-brake-only arrangement; the band-brake assemblies illustrated for MX, MK and AK are different executions. The 24-inch drum also has a different installation length and mounting pattern from the 16-inch version. Keep these distinctions when comparing an existing winch with a proposed replacement, and request a certified drawing for the actual order.
The reference drawings below cover the FA5i family. They show interfaces and alternative equipment, including brake assemblies and a limit switch. The reference sheet states that dimensions are subject to change. These illustrations are not fabrication drawings or confirmation that every pictured accessory is part of FA5i-24XK1G.
Provide the mounting-space envelope, the support arrangement and access restrictions with an enquiry. The factory reference uses the letters A, B and C for the bolt-down pattern; C identifies the bolt-hole inside diameter. The dimensions must be selected from the column for the relevant drum length and brake type. AVISTA can request the current execution drawing so that the buyer can check the support and interfaces before an order is released.
The published performance is stated at dynamic inlet pressure, measured while the winch is operating. An enquiry should therefore describe the available pressure and air-flow capacity at the point of use, the supply-line arrangement and the proposed control location. Identify requirements for air-line accessories, remote controls, environmental protection and inspection documentation separately. Their presence in a family photograph does not establish inclusion in the quoted scope.
Send the full model code FA5i-24XK1G together with the required material load, lifting or pulling duty, travel and operating frequency. Include the proposed rope diameter and storage requirement, available mounting space, site conditions and destination. If the enquiry concerns a replacement, photographs of the existing nameplate, the original order documents and installation drawings help resolve execution differences. Confirm any required certification or witness testing during quotation.
AI-assisted product imagery on this page illustrates the FA5i series and may show optional accessories. Technical selection and the supply scope remain tied to the confirmed model code and manufacturer documents. Contact AVISTA for current product information and an application-specific quotation.
Download the manufacturer FA5i reference technical sheet, PFS-FA5i-09072010 (PDF). This reference is provided for comparison; request current certified execution documents for installation.
Price on request. Contact AVISTA for current pricing and a confirmed supply scope. These project-configured units are supplied to order; no local stock or historical factory lead time is promised on this page. Packing, freight, taxes and delivery terms are confirmed in the order quotation.
Request a quotation from AVISTA or view Lifting Equipment. See the manufacturer’s lifting solutions for product families.
Available on backorder
Enter air temperature and relative humidity.
