51.736,80 € — EXW Ingersoll Rand Warehouse PriceGenuine Ingersoll RandDirect supply from Ingersoll Rand warehouseSupplier availability: Available on backorderAvailability is informational and does not constitute a stock reservation. Availability is rechecked before order confirmation.
The MR150KA-1CE is an Ingersoll Rand Man Rider Air winch execution. The execution data specifies 330 lbs. (150 kgs.) on 2nd layer *Not rated for utility lifting; dedicated for lifting one person in a safety harness. for man-rider line pull rating. The full model reference is retained for quotation, configuration review and ordering.

The selected model is described by the execution data below. Optional accessories from the wider series are not included unless expressly stated in the order quotation.
| Manufacturer | Ingersoll Rand |
|---|---|
| Series | Man Rider Air |
| Base model | MR150K |
| Full model / SKU | MR150KA-1CE |
| Man-Rider Line Pull Rating | 330 lbs. (150 kgs.) on 2nd layer *Not rated for utility lifting; dedicated for lifting one person in a safety harness. |
| Man-Rider Line Speed | Variable, 0 – 98 fpm (30 mpm) on 2nd layer |
| Wire Rope Storage Capacity | 505 feet (154 mts) with 7/16 inch (10mm) dia. wire rope on 5 layers Wire rope not included unless otherwise noted. *Recommended wire rope working capacity is 80% of the value shown above. |
| Construction | Stainless steel base and uprights. Steel drum and protective bars. |
| Design Factor | 10:1 |
| Design Temperature | Minus 20 degrees C. |
| Motor Type | Gear Motor |
| Motor H.P | 2 HP |
| Gearing | Planetary |
| Brake(s) | Automatic drum and automatic disc brakes. |
| Drum Length | 11.8 inch (300.5mm) |
| Drum Winding | Underwound |
| Drum Grooving | For 10mm dia. wire rope Stainless Steel Braided Hoses |
| Inlet Size | 3/4 inch NPT |
| Pressure | 75 psig (5 bar) – 105 (7 bar) at the air inlet (dynamic) |
| Flow | 88 cfm (2.5 m3/min) |
| Air Supply Hose Size | 1 inch I.D. (recommended; not included) |
| Noise Level | 89 dBA (at full rated line pull, lifting) |
| Testing | 180% SWL per standard IR test procedure |
| Weight | (estimated): Net: 465 lbs / 210 kgs |
Personnel-lifting and utility ratings must not be interchanged. The stated rope layer, control configuration, braking arrangement and emergency features are part of the application review. Where two ratings are shown, each applies only to its stated duty. Use the supplied unit documentation and approved installation requirements before operation.
Send the required load, working travel or rope length, control reach, mounting arrangement, site temperature and available power supply to AVISTA. Also identify any required hazardous-area classification or third-party witness activity. An accessory, marking or certificate available for another execution is not automatically included in this model.
AVISTA public price: EUR 51,736.80 for one complete unit or specified package. Supply is on an order/backorder basis. Delivery timing, freight, packing, taxes and the final approved scope are confirmed in the order quotation. Historical supplier lead times are not presented as current stock availability.
The photograph is representative of the stated series unless identified as an exact execution image. Controls, guards, paint, trolley arrangement and included accessories may differ. The written scope and approved unit documents take precedence.
Use MR150KA-1CE without shortening its suffixes. Specify the required operating duty and any additional options separately so that a similar-looking model is not substituted.
Request a quotation from AVISTA or browse Lifting Equipment. General manufacturer resources are available at Ingersoll Rand Lifting Solutions.
Available on backorder
Enter air temperature and relative humidity.