Prices are for information purposes only. Please contact us for the final price.
POA (Request a Quote) — EXW Ingersoll Rand Warehouse PriceGenuine Ingersoll RandDirect supply from Ingersoll Rand warehouseSupplier availability: Supplied to order — current price, availability and lead time require confirmation.Availability is informational and does not constitute a stock reservation. Availability is rechecked before order confirmation.
The LC2E1000QI-E-ND122202 is an Ingersoll Rand Liftchain Electric electric chain hoist execution. The execution data specifies 100 metric tons for nominal load capacity. The full model reference is retained for quotation, configuration review and ordering.
Standard IR paint as per IR -382-31341 Galvanized chain container (40 m of capacity) Control box with IP-56 protection class (shipped loose) Note : Control box to be installed in a Non Atex Zone Festooning system to be suitable for 11 meter beam length.
| Manufacturer | Ingersoll Rand |
|---|---|
| Series | Liftchain Electric |
| Base model | LC2E1000QI |
| Full model / SKU | LC2E1000QI-E-ND122202 |
| Nominal load capacity | 100 metric tons |
| Number of chain falls | 4 |
| Height of lift | 9 meters |
| Electric Remote control length | 9 meters |
| Type of chain | 32×90 mm (grade 8) |
| Chain safety factor | > 5 |
| Voltage | 400 V 3 phase |
| Frequency (Hz) | 50 |
| Hoisting Motor Power | 10 HP |
| Lifting speed at nominal load | 0.2 m/min |
| Number of trolleys | 2 |
| Maximum Load Capacity of each trolley | 500 KN |
| Travelling Motor Power | 3 HP |
| Number of trolley drive motor | 1 |
| Travelling speed at nominal load | 1.7 m/min |
| Suitable for beam width | 300 mm, Thickness : 50 mm |
| Minimum headroom from trolley wheels to bottom clevis | 1900 mm |
| Estimated weight with 9 m of lift | 7000 kg |
| Weight per meter of lift | 98 kg |
| Driving mechanism classification | 1Bm |
| Design Temperature | minus 40°C to 40°C |
This is a project-configured electric chain hoist with powered trolleys. Lift height, chain arrangement, motor power, supply voltage and control length are execution-specific. The separately supplied control box must be installed in a non-ATEX area as stated in the manufacturer’s scope; the trolley/hoist marking does not extend to that box.
Send the required load, working travel or rope length, control reach, mounting arrangement, site temperature and available power supply to AVISTA. Also identify any required hazardous-area classification or third-party witness activity. An accessory, marking or certificate available for another execution is not automatically included in this model.
Price on request. Contact AVISTA for a current quotation for this exact configuration. Supply, delivery, packing and freight are confirmed for each order; the equipment is not represented as local stock.
Use LC2E1000QI-E-ND122202 without shortening its suffixes. Specify the required operating duty and any additional options separately so that a similar-looking model is not substituted.
Request a quotation from AVISTA or browse Lifting Equipment. General manufacturer resources are available at Ingersoll Rand Lifting Solutions.
Available on backorder
Enter air temperature and relative humidity.
